|
|
 |
Off Loader Step 1 Pack sold with 2 leads, one made up with the other to be assembled. |
 |
Off Loader Step 2 Thread tail rubber and insert onto main line. |
 |
Off Loader Step 3 Tie on any size 8 swivel onto main line. |
 |
Off Loader Step 4 Pull main line tight allowing swivel eye to line up with the hole in the insert. |
 |
Off Loader Step 5 Get peg ready. |
 |
Off Loader Step 6 Push peg through hole to trap swivel in place. |
 |
Off Loader Step 7 Snap off peg away from stem. |
 |
Off Loader Step 8 Check to make sure swivel is locked in place. |
 |
Off Loader Step 9 Pull insert back through lead. |
 |
Off Loader Step 10 Make sure the peg stem is in the upright position to line up with the groove in the lead. |
 |
Off Loader Step 11 Push tail rubber onto insert to secure lead, add hooklink. |
 |
Off Loader Step 12 Hook on small PVA bag to avoid tangles whilst casting. |
 |
Off Loader Step 13 Ready to cast. |
 |
Off Loader Step 14 Ready to cast. |
 |
Off Loader Step 15 If lead becomes snagged. |
 |
Off Loader Step 16 The insert will push against the tail rubber (due to the swivel being pegged) |
 |
Off Loader Step 17 Lead will release from the main line allowing fish to be safely landed. |
 |
Move cursor over photo for an alternative view of Off Loader at work. |